VATS Sponge forceps thoracoscopic 8mm 10mm 12mm teeth 8x340mm manufacture
We supply VATS Sponge forceps thoracoscopic 8mm 10mm 12mm teeth 8x340mm with 2 years warranty. We product VATS Sponge forceps thoracoscopic 8mm 10mm 12mm teeth 8x340mm manufacture many years, we export our products mainly to Europe and America, in which enjoying good reputation. We desire to have a long term business relationship with you.
(1)Product introduction of VATS Sponge forceps thoracoscopic 8mm 10mm 12mm teeth 8x340mm manufacture
Many doctors prefer to use these forceps because they help minimize damage during surgery. These forceps enable a physician to hold and move tissue very precisely and gently. They are also helpful in preventing trauma.
(2)Product parameter (specification) of VATS Sponge forceps thoracoscopic 8mm 10mm 12mm teeth 8x340mm manufacture
VATS forceps without rechet
lymph grasping forceps
340mm, jaw width 12mm, without teeth
340mm, jaw width 10mm, without teeth
340mm, jaw width 8mm, without teeth
340mm, jaw width 12mm, with teeth
340mm, jaw width 10mm, with teeth
340mm, jaw width 8mm, with teeth
inverted triangle forceps
minimall incision suction
Curved needle holder
straight needle holder
340mm, jaw width 3.2mm
340mm, jaw width 2.5mm
340mm, jaw width 10mm
340mm, jaw width 5mm
curved dissecting forceps
340mm, height of arc 15mm
340mm, height of arc 20mm
340mm, height of arc 25mm
340mm, right angle 25mm
340mm, right angle 20mm
340mm, right angle 15mm
(3)Product feature and application of VATS Sponge forceps thoracoscopic 8mm 10mm 12mm teeth 8x340mm manufacture
Typically, sponge holding forceps are seven to nine inches (about 18 to 23 centimeters)in length. The jaws themselves are normally rounded. Elongated tips may be included for delicate operations. The most common medical area to utilize sponge forceps is gynecology. They are often used in surgical female sterilization procedures, such as the insertion of an intrauterine device.
1: About the sample what is the cost of transportation?
The freight depends on weight, packing size and your country or province region, etc.
You can confirm slipper by photo and video to save this money, If you become our old customer.
2: How to control quality?
A, all the raw materials by IQC （Incoming Quality Control）before launch whole process into the process after the screening.
B, process each link in the process of IPQC （Input process quality control）patrol inspection.
C, after finished by QC full inspection before packing into the next process packaging.
D, OQC before shipment for each slipper to do full inspection.
Coz the value of most of our products is in high, the MOQ is 1 pc.
+ FIME (Orlando, USA)
Booth: BL51 Date: 8th ~ 10th AUG, 2017
+ Arab Health 2018 (Dubai, United Arab Emirates)
Booth: Z5. D36 Date: 29th Jan ~ 1st Feb, 2018